b'OIL EXTRACTORSThese fluid extractors are a reliable and efficient methoda set of 6 flexible probes, 3 adapters (to fit Mercedes, BMW and for removing fluids from most any engine, transmission,VW), 6 suction hose and 6 discharge hose. Units are powder differential, transfer case or gearbox. They are extremely easycoated for durability and long life.to operate and maintain and are ideal for use with automobiles, trucks, tractors, farm machinery, marine engines, forklifts,WARNING: NOT FOR USE WITH FLAMMABLE, USED OIL industrial machinery and various other small engines. FluidCORROSIVE OR EXPLOSIVE FLUIDSextractors are designed to be used with hot engine oil, 104 F140 F, which allows the oil to flow more freely.A shop air supply at approximately 100 PSI @10 CFM is all that is needed to create a vacuum. All extractors are supplied with OIL EXTrACTOrSP/N 24271R shownP/N 24224R shownP/N 24270R shownP/N24224R P/N24271RThis compact fluid extractor has an eight gallon tank capacityThis fluid extractor is the same as P/N 24270R but is equipped with a suction capacity of up to 5 gallons. Vacuum charge iswith a transparent bowl with 2 gallon capacity. Extracted easily monitored by a vacuum gauge while tank level is visiblefluid may be drawn directly into the transparent bowl to allow via a sight gauge. Once the maximum fluid level is reached,a visual check of the extracted fluid for moisture, contaminants used fluid can be quickly emptied by pressurizing the tank withor to measure the quantity of extracted fluid. Fluid can then approximately 10 PSI of shop air. Overall dimensions are 13 W xbe drained into the reservoir below. If desired, extracted fluid 15 D x 38 H, empty weight is 28 lb. may be drawn into the tank reservoir without stopping in the P/N24270R intermediate step at the transparent bowl. Overall dimensions Fluid extractor with 21 gallon capacity is equipped with a tankare 17 W x 21 D x 52 H, empty weight is 55 lb.level sight, vacuum gauge, 6 suction hose with shutoff valve, 6 discharge hose and a full complement of suction probes and three adapters as described above. Vacuum generation time is approximately 34 minutes using 100 PSI of shop air. Overall dimensions are 17 W x 21 D x 38 H, empty weight is 48 lb.102 800.894.3572'