b'PumPs ELECTrIC PUmPSELECTRIC OIL PUMPSThe Liquidynamics family of Electric Oil Pumps are designedimproved metering accuracy and reduced maintenance. Please to provide an effective alternative solution to pumping viscouscontact Liquidynamics to ensure correct pump choice for your fluids such as engine and gear oil, as well as non-viscous fluidsspecific application. Variables to consider when choosing an such as hydraulic fluid, transmission fluid and 100% (non-mixed)electric pump include fluid viscosity, fluid temperature, plumbing antifreeze. Pumps are intended for indoor use only. length, plumbing diameter, suction distance and any pertinent Advantages to using Electric Oil Pump includes; air compressorrestrictions such as hose reels, control valves, elbows, etc.PumPsnot being required, quiet operation, non-pulsating flow for P/N 33221 shown20 GPM High Volume Oil Transfer PumpELECTrIC PUmPSP/N33221 P/N33223A great choice for use in transfer of medium and high viscosityPump is ideal for transferring larger quantities of light weight oil fluids up to 2,000 centistoke. Maximum discharge pressure(up to 165 cps), hydraulic fluid, transmission fluid and antifreeze of 170 PSI with full bypass at 240 PSI, 3.0 gpm. Uses speciallyincluding 50/50. The bronze construction allows this pump to designed steel gears for efficient and quiet transfer of fluidsbe used for bulk transfer of premix antifreeze as well as other such as engine oils, gear oils, etc. Manual on/off switchwater based fluids.integrated into electrical connection box. Pump system includes 2 HP 115/230 VAC motor, 20 GPM pump P/N33222 w/1 NPTF inlet/outlet, 30 mesh inlet strainer, heavy duty rotary Same design as P/N 33221 but utilizes a 2.0 HP motor forON/OFF switch and 25 of 12 gauge, 3 wire grounded power cord.additional pressure and flow rate capability. Will pump up to 4.0If this pump is intended for applications where the discharge GPM with pressure up to 325 PSI and is rated for continuousflow can be shut off, a bypass valve must be installed to prevent operation. For use with fluids up to 2,000 centistoke. pump and/or motor damage. Order P/N 950057 separately (shown below) for this purpose. Bypass flow should be directed back into tank to prevent fluid and pump from overheating.NOTE: Use for pumping non-flammable fluids.NOTE: See page 85 for information on lubricant viscosities and changes with temperature.3/4 Bypass KitP/N950057Bypass kit protects P/N 33223 High Volume Oil Transfer Pump in cases where fluid flow is shutoff P/N33250 at discharge, pump fluid is then bypassed to protect This high flow pump has an adjustable bypass for pressures uppump and motor from damage. Kit includes 1 x 1 to 80 PSI and is ideal for transferring larger quantities of lightx 1 T fitting and 3/4 preset bypass valve, set at oils, hydraulic and transmission fluids, 100% antifreeze and60 PSI maximum. similar fluids over short distances, maximum viscosity 500 cst, 7NOTE: plumbing (hose) from bypass valve to gpm. Manual on/off switch, 115 VAC motor with short extensiontank return is responsibility of user.cord and plug for easy connection.www.liquidynamics.com 15'