b'FLUID CONTROL VALVESP/N900297Lightweight polypropylene ball valve with 8 angled end P/N32107-RM flange for convenient transfer of liquids into tanks, drums, etc. meters This high flow control valve is an excellent solution whenUses stainless steel nuts and bolts for a wide range of fluid maximum flow is required when using high flow oil pumps suchcompatibility. 1 NPTF inlet, 150 PSI max pressure.as Liquidynamics P/N 21300 oil pumps. The control handle has a maximum working pressure of 1,000 PSI and up to 16 GPM flowHigh Flow Control Valverate. It is intended for use with engine oil, gear oil, hydraulic fluid, ATF and 100% antifreeze. Inlet fitting is 1 NPTF swivel,P/N32110Rdischarge spout is 10 long with a High flow capacity fluid control handle, manual, twist to open/close tip. designed for heavy duty use requiring high flow rates, up to 24 GPM. Control handle has low pressure loss to maximize flow rates and has a balanced valve design to allow easy flow adjustments. Control handle has pop open tippush to close. Max operating P/N32107-FM pressure is 1,450 PSI, 3/4 NPTF inlet swivel, rigid spout.Same as P/N 32107-RM above, except that it is fitted with a 12 long flex hose with the same manual twist to open/close tip. FLUID CONTrOL VALVES P/N100328 P/N32110FFluid controlHigh flow capacity fluid control nozzle for use withhandle, designed for heavy duty use windshield washer fluid, 50/50requiring high flow rates, up to 24 GPM. antifreeze, 100% antifreeze and otherControl handle has low pressure loss to maximize flow rates water based fluids, 1/2 NPTF inlet connection,and has a balanced valve design to allow easy flow adjustments. 20 GPM max. flow rate, 365 PSI max. pressure. Control handle has pop open tippush to close. Max operating pressure is 1,450 PSI, 3/4 NPTF inlet swivel, flex hose spout.METER ACCESSORIESP/N900245 P/N81200-01ARigid spout with auto tip for use 1/2 x 12 Hose, 1/2 NPTM x 1/2 NPTMwith mechanical meters, 1/2 NPTM P/N81230AP/N900246 3/8 x 12 Hose, 1/2 NPTM x 1/4 NPTMAngle spout for mechanical meters, includes 1/2 auto tip. P/N81231AP/N900247 3/8 x 18 Hose, 1/2 NPTM x 1/4 NPTMRigid spout with manual tip for use with mechanical meters, P/N9002681/2 NPTM Manual high flow tip, 1/2 NPTF (forP/N900266 use with 1/2 hose P/N 81200-01A)Manual tip, 1/4 NPTF (for use with 3/8 hose P/N 81230A) P/N900268-BSP P/N900266-BSP Manual high flow tip, 1/4 BSP (for replacement on rigid andManual tip, 1/4 BSP (for replacement on flex spouts)rigid and flex spouts) P/N100138P/N900270 Compression Nut Assy.Automatic tip, 1/4 NPTF (for usewith 3/8 hose P/N 81230A) P/N900253Straight swivel, 1/2 NPTF x 1/2 NPTM, 1,000 PSIP/N900270-BSP working pressure. For use on mechanical meters only.Automatic tip, 1/4 BSP (for replacement on rigid andflex spouts) P/N100163Swivel Guard, RedP/N100161Swivel Guard, YellowP/N100164Swivel Guard, GreenP/N100160Swivel Guard, BlueP/N100162Swivel Guard, Black26 800.894.3572'