b'GREASE HOSE & FUEL HOSEThese hoses are suitable for use with Hydraulic Fluid andPlease contact Liquidynamics if you require a special Grease. Hoses are typically supplied with a rigid fitting on onehose type, length or fittingsside and a swivel fitting on the other side.HOSE REELS HIGH PRESSURE HOSE GROUNDED FUEL HOSEFor use with 60:1 Grease Pumps. For use with Electric Fuel Pumps and U.L. Approved D.D. Pumps,81300-xxHigh pressure hose used for grease and hydraulic fluid transfer.available as non-stock item. 81301-xxHose is constructed with a neoprene tube, two high tensileSingle wire braid construction provides the flexibility of a81315-xxstrength wire braids and MSHA approved oil and weathersoftwall and the durability of a hardwall and is resistant to81316-xxresistant synthetic rubber cover, (3/8 hose has a polyester tubecrushing, cuts, abrasions, sun and weather. This hose is81317-xxand neoprene cover). Maximum working pressure for the 1/4 IDcompatible with leaded and unleaded gasoline, gasohol and81318-xxhose is 5,800 PSI with a minimum burst pressure of 20,000 PSI,diesel fuel. Tubing is black nitrile with black nitrile / PVC cover while the 3/8 ID hose has a maximum working pressure ofand has a single wire braid with solid brass couplings for82400-xx4,800 PSI and a minimum bursting pressure of 16,000 PSI. Highpositive grounding. Temperature range is -40 F to +180 F and a82410-xxpressure hoses are flexible, with a minimum bend radius of 2.0working pressure of 150 PSI.and 6.0 respectively. Hoses have a working temperature of -40P/NHOSE SIZEFITTINGSNOTE 82450-xxF to +212 F and are SAE/USCG marine listed. 82400-063/4 x 63/4 x 3/4 (A) 82460-xxP/NHOSE SIZEFITTINGSNOTE 82400-123/4 x 123/4 x 3/4 (A)81300-021/4x 21/4 x 1/4 (A) 82400-12A3/4 x 123/4 x 3/4 (D)Grease hose & FueL hose 81300-061/4x 61/4 x 1/4 (A) 82400-20A3/4 x 203/4 x 3/4 (D)81300-121/4 x 121/4 x 1/4 (A) 82400-253/4 x 253/4 x 3/4 (A)81300-151/4 x 151/4 x 1/4 (A) 82400-303/4 x 303/4 x 3/4 (A)81300-201/4 x 201/4 x 1/4 (A) 82400-353/4 x 353/4 x 3/4 (A)81300-251/4 x 251/4 x 1/4 (A) 82400-403/4 x 403/4 x 3/4 (A)81300-301/4 x 301/4 x 1/4 (A) 82400-503/4 x 503/4 x 3/4 (A)81300-401/4 x 401/4 x 1/4 (A) 82410-061 x 61 x 1 (A)81300-501/4 x 501/4 x 1/4 (A) 82410-12A1 x 121 x 1 (D)81301-251/4 x 251/4 x 9/16 (B) 82410-251 x 251 x 1 (A)81301-301/4 x 301/4 x 9/16 (B) 82410-25A1 x 251 x 1 (D)81301-401/4 x 401/4 x 9/16 (B) 82410-301 x 301 x 1 (A)81301-501/4 x 501/4 x 9/16 (B) 82410-351 x 351 x 1 (A)81301-601/4 x 601/4 x 9/16 (B) 82410-401 x 401 x 1 (A)81315-023/8 x 23/8 x 3/8 (A) 82410-501 x 501 x 1 (A)81315-063/8 x 63/8 x 3/8 (A) (A) NPTM Rigid fitting x NPTM Swivel fitting81315-123/8 x 123/8 x 3/8 (A) (D) NPTM Rigid fitting both ends81315-203/8 x 203/8 x 3/8 (A)81315-253/8 x 253/8 x 3/8 (A)81315-303/8 x 303/8 x 3/8 (A) NON GROUNDED FUEL HOSE81315-403/8 x 403/8 x 3/8 (A) For use with Gravity or Hand Operated Equipment.81315-503/8 x 503/8 x 3/8 (A)81315-603/8 x 603/8 x 3/8 (A) A quality hose designed for gravity flow applications for use in 81316-253/8 x 253/8 x 9/16 (B) agricultural and construction sites. Hose has a working pressure 81316-303/8 x 303/8 x 9/16 (B) of 75 PSI with a 2 spiral polyester yarn construction and Nitrile / 81316-403/8 x 403/8 x 9/16 (B) PVC cover.81316-503/8 x 503/8 x 9/16 (B) P/NHOSE SIZEFITTINGSNOTE81317-061/2 x 61/2 (C) 82450-103/4 x 103/4 (D)81317-121/2 x 121/2 (C) 82450-123/4 x 123/4 (D)81317-201/2 x 201/2 (C) 82450-153/4 x 153/4 (D)81317-501/2 x 501/2 (C) 82450-203/4 x 203/4 (D)81318-063/4 x 63/4 (C) 82460-101 x 101 (D)81318-123/4 x 123/4 (C) 82460-121 x 121 (D)81318-203/4 x 203/4 (C) 82460-151 x 151 (D)(A) NPTM Rigid fitting x NPTM Swivel fitting 82460-201 x 201 (D)(B) NPTM Rigid fitting x 18 JICV fitting (D) NPTM Rigid fitting both ends(C)NPTM Rigid fitting both ends, 10,000 PSIWorking Pressure72 800.894.3572'