b'OILCOP GEN II TANK MONITORINGOILCOP GEN II TMTANK MONITORING*Tank Level Probes Tank Monitoring AccessoriesTank Level Probes are designed to be inserted from the top of aP/N907061tank to the bottom, but not touching the bottom - best to keepTank probe/transducer junction box is water and weather the probe away from the debris that tends to accumulate at theresistant. Provides a safe and convenient method to connect FLUID MGMT.bottom of a tank. Choose a probe that most closely fits the tankincoming cable from the tank probe or depth that you are working with to achieve best accuracy. transducer to the outgoing cable (P/N P/N100881-06-20 100709P-XX) which connects to the Tank Tank Probe specificallyMonitor Module (TMM).designed to fit 3/4 bungP/N907062fittings on 55 Gallon drumsTank probe/transducer junction box is which allows the 2 bung fitting to be used for pumpwater and weather resistant, and provides placement. This probe can alsolightning protection which provides a safe and convenient be used on tanks up to six feetmethod to connect incoming cable from the tank probe or deep. Includes additional 20 ft. of cabletransducer to the outgoing cable (P/N 100709P-XX) which for a total cable length of 26 ft., includes a 3/4 NPTM strainconnects to the Tank Monitor Module (TMM).relief to secure the probe cable, probe diameter is 0.862.P/N100881-10-10OILCOP GEN II TANK mONITOrINGTank probe for tanks up to 10 ft. deep, includes an additional 10 ft. cable for a total cable length of 20 feet. Kit includes a 1 NPTM strain relief to secure the probe cable. Pressure sensitive tankAir Solenoid Valveslevel probe has a working range depth of 10 ft., probe diameter is 1.03 to fit a 1 or larger bung opening. P/N540081-A1/4 NPT air solenoid valve w/3 ports, either normally open or P/N100881-20-20 normally closed, for use in controlling air supply to pneumatic Tank probe for tanks up to 20 ft. deep, includes an additional 20pumps. 24 VDC coil has red LED power indicator and accepts ft. cable for a total cable length of 40 feet. Kit includes a 1 NPTM1/4 push to connect tubing.strain relief to secure the probe cable. Pressure sensitive tank level probe has a working range depth of 20 ft., probe diameterP/N540081-Bis 1.03 to fit a 1 or larger bung opening. 3/8 NPT air solenoid valve w/3 ports, either normally open or normally closed, *Tank Level Transducers for use in controlling air supply to Tank Level Transducers have a 1/2 NPTM thread and arepneumatic pumps. 24 VDC coil has designed to be attached to the outside bottom of a tank. Choosered LED power indicator and accepts a transducer that most closely fits the tank depth you are3/8 push to connect tubing.working with to achieve best accuracy. P/N540081-CP/N100881B-4.5-24 1/2 NPT air solenoid valve w/3 ports, either normally open or Transducer with a tank level working range of 4 ft. (54),normally closed, for use in controlling air supply to pneumatic supplied with a 24 ft. cable length. pumps. 24 VDC coil has red LED power indicator and accepts 1/2 push to connect tubing.Connection KitsP/N 100881B-10-06 shown P/N950416Connection kit provides all fittings required to P/N100881B-10-06 allow 1/2 NPTM tank level transducers, P/N Transducer with a tank level working range of 10 ft., supplied100881B-xx-xx, to connect to the bottom of poly with a 6 ft. cable length. tanks with 1 NPTF fitting.P/N100881B-20-06 P/N950417Transducer with a tank level working range of 20 ft., suppliedConnection kit includes all with a 6 ft. cable length. fittings necessary to allow P/N 100881B-xx-xx tank level P/N100881B-30-06 transducers to connect to a 2 Transducer with a tank level working range of 30 ft., suppliedNPTM fitting such as found on the with a 6 ft. cable length. bottom of IBC tanks.* NOTE: Probe depth range is dependent on fluid density, consult factory when using fluids other than newoil.www.liquidynamics.com 61'